USB BitScope 325 ( BS325U )

The correct appearance of this website is only visible in graphical browsers that support web standards. We try to ensure our content is accessible to any browser but we recommend you upgrade your web browser if you can.

USB BitScope 325

Product Summary
Order Code	ADD TO CART BS325U
Description	100 MHz x 10 channel (2 analog + 8 logic) 40 Ms/S, 1MB buffer, instant replay waveform generator.
Comment	USB, Isolated.
Price	USD (US Dollar) $ 695.00
Net Weight	813 g

Product Information

BS325U is a high performance USB connected Mixed Signal Scope and Data Acquisition System.

BS325U offers all the benefits of the popular BS310U but supports up to eight times more data per frame, a built-in record/replay waveform generator, dedicated external trigger and probe calibration, full isolation from the PC and simultaneous capture on all 10 channels.

A plug and play USB peripheral interface compatible with USB 2.0 and USB 1.1 ports is built-in.

If you prefer network connectivity please see the functionally equivalent BS325N model.

Feature	Specification
Analog Inputs [1]	4 (2 x BNC + 2 x POD)
Analog Bandwidth [2]	100 MHz
Analog Channels	2 (dual A/D converters)
Logic Channels	8 (via POD connector)
Input Impedance	1M/20 pF (BNC), 100K/5 pF (POD)
Input Voltage Range (+/-)	48 mV (x20 prescale) to >1kV (100:1 probe)
Vertical Scaling (DSO)	500 uV/Div to 500 V/Div (100:1 probe)
Timebase Range (DSO)	50 nS/Div to 1 S/Div
Post-Trigger Delay (DSO)	8 uS to 2 hours (programmable)
Input Prescaler [3]	x20 and GND reference
Analog Sensitivity	1mV to 40mV (no prescale enabled)
Maximum Sensitivity [4]	200 uV (Time), 50uV (Freq), 5uV (Mean)
Hardware Sample Rates	15kSa/S to 40MSa/S (58 rates)
Channel Buffers (max)	512 kS (analog) plus 512 kS x 8 (logic)
Streaming Sample Rates [5]	1Sa/S to 50kSa/S (continuous)
Real-Time Sample Rates [6]	1kSa/S to 40MSa/S (per buffer)
Equivalent-Time Rates [7]	10MSa/S to 2GSa/S (per buffer)
Resolution (Converter)	8 bit converter with 6.8 to 7.6 ENOB
Maximum Resolution [8]	13 ENOB (at 1MHz and lower)
Glitch Capture (min)	25 nS
External Trigger Bus	YES (logic channels may also be used)
BitScope Digital Trigger	8 bit combinatorial on logic or A/D outputs.
High Speed Analog Trigger	YES (on any analog input)
Waveform Generator [9]	10 MSa/S (BNC B, POD and panel pin)
Logic Pattern Generator [10]	40 MSa/S (via logic POD)
Analog Interface	2 x BNC and 2 x POD
Logic Interface	1 x IDC-26 (inc. logic, analog, data and power)
Display Frame Rate (max)	50 Hz (single channel), 25 Hz (dual or mixed)
Data Upload Speed (max)	1,200 kb/S (Raw Data), 450 kb/S (Enhanced)
PC Host Interface	Opto-Isolated USB 2.0 (USB 1.1 compatible)
Included PC Software	BitScope DSO Virtual Instrument Application
Power Requirement [11]	12 VDC @ 400 mA (max), 2.5mm CP
Operating Temperature	0ºC to 50ºC
Storage Temperature	-20°C to +60°C
Size (WxHxD)	140x140x35 mm

[1]	Analog capture for each channel is selectable from BNC or POD individually.
[2]	Input bandwidth refers to the bandwidth of the analog input circuitry and the compensated A/D converter with the prescaler disabled.
[3]	User selectable analog input prescaler with x20 gain for use with low level signals or when input bandwidth limiting is required.
[4]	Minimum measurable peak-to-peak sinusoidal waveform voltage when both resolution enhancement and input multiplier are enabled, when viewed as a waveform (Time) or viewed as a spectrum (Freq) and the minimum measurable average DC voltage (Mean).
[5]	Streaming capture sample rates for data logging and transient recorder applications.
[6]	Real-Time (Nyquist Limited) sample rates (captured per frame).
[7]	Equivalent-Time (not Nyquist limited) sample rates sample rates (captured per frame). Applies to the capture of periodic and many common RF signals.
[8]	Specifies the maximum effective number of bits (ENOB) achieveable with resolution enhancement enabled.
[9]	The waveform generator is standard for waveform generation to 10MSa/S and waveform capture at all supported sample rates. Supports instant replay.
[10]	The logic pattern generator is standard for logic pattern generation to 40MSa/S and analog waveform capture at all supported sample rates. Supports instant replay.
[11]	Includes PSU-02 Universal AC adaptor and US power cable as standard.

E&OE

Analog and logic probes are sold seperately.